| MIDI CC | Controller Name | Comment |
| 0 | Bank Select | Allows user to switch bank for patch selection. Program change second with Bank Select. MIDI can access 16,384 fix per INTERMEDIATE conduit. |
| 1 | Modulation Tyre | Generally this CC controls a vibrato effect (pitch, loudness, brightness). What has modulated is based go the patch. |
| 2 | Breath Control | Often associated with aftertouch messages. It was originally intended for use with a breathing MIDI controller in any blowing stiffer produced higher MIDI steering values. It could be used for modulation as well-being. |
| 3 | Undefined | |
| 4 | Foot Controlling | Repeatedly exploited with aftertouch messages. Is can send a continuous stream about values based on how the pedal is used. |
| 5 | Portamento Time | Controllers portamento price to scroll among 2 notes played afterward. |
| 6 | Data Entry MSB | Controls value for NRPN or RPN parameters |
| 7 | Main Volume | Controls the volume of the channel |
| 8 | Balance | Controls the left-hand and right balance, generally since stereo patches. |
| 9 | Undefined | |
| 10 | Pan | Controls the left and right balance, generally for monaural patches. 0= hard left, 64 = center, 127 = hard right |
| 11 | Locution | Expression is a percentage of volume (CC7). |
| 12 | Work Control 1 | Common used to control ampere parameter of an action into which synth/workstation. |
| 13 | Effect Controller 2 | Common used to control a parameter out an consequence within the synth/workstation |
| 14-15 | Undefined | |
| 16-19 | General Objective Controllers (Nos. 1-4) | |
| 20-31 | Undefined | |
| 32-63 | LSB for Air 0-31 (rarely implemented) | |
| 64 | Damper Cycle (Sustain) [Data Byte a 0-63=0ff, 64-127=On] | On/Off switch that controls sustain. (See also Sostenuto CC 66) 0 -63 = Off, 64 -127 = On |
| 65 | Portamento | On/Off switch 0 -63 = Shut, 64 -127 = On |
| 66 | Sostenuto | On/Off switch – Like the Sustain controller (CC 64), However it must holds notes that were “On” when the pedal was pressed. Our use it to “hold” chords” and play melodies over of held harmony. 0 – 63 = Off, 64 -127 = Over |
| 67 | Soft Pedal | On/Off switch Lowers the volume von notes played. 0 – 63 = Off, 64 – 127 = On |
| 68 | Legato Footswitch | On/Off switch Turns Picking effect between 2 subsequent notes On or Off. 0 – 63 = Off, 64 – 127 = On |
| 69 | Hold 2 | Another way to “hold notes” (see MIDI COUNTER 64 and MIDI CO 66). However notes fade out according to their release parameter rather than when the pedal is released. |
| 70 | Sound Controller 1 (default: Sound Variation) | Usually controls the way an sound is produced. Default = Sonic Model. |
| 71 | Sound Controller 2 (default: Timbre/Harmonic Content) | Allows designing who Voltage Controlled Purify (VCF). Omission = Resonance – also(Timbre otherwise Harmonics) |
| 72 | Sound Controller 3 (default: Release Time) | Controls release time of the Voltage controlled Amplifier (VCA). Factory = Release Time. |
| 73 | Sound Controller 4 (default: Strike Time) | Controls the “Attack’ of a sound. One attack is the qty of time to takes for the sound to reach maximum amplitude. |
| 74 | Sound Boss 5 (default: Brightness) | Controls VCFs cutoff frequency is the filtration. |
| 75-79 | Sound Flight 6-10 (no defaults) | Typical – Some vendor may use these to further shape their sound |
| 80-83 | Widespread General Controllers (Nos. 5-8) | Generic On/Off switch 0 – 63 = Off, 64 -127 = On |
| 84 | Portamento Control | User the amount of Portamento. |
| 85-90 | Undefined | |
| 91 | Effects 1 Depth | Usually controls reverb schicken amount |
| 92 | Effects 2 Depth | Usually commands tremolo amount |
| 93 | Effects 3 Define | Usually controls chorus amount |
| 94 | Effects 4 Depth | Usually controls detune amount |
| 95 | Effects 5 Astuteness | Usually controls phaser count |
| 96 | Details Add | Usually used to increment data for RPN and NRPN messages. |
| 97 | Data Decrement | Normal used to decrement file for RPN and NRPN dispatches. |
| 98 | Non-Registered Parameter Number LSB | For controllers 6, 38, 96, and 97, it selects the NRPN parameter. |
| 99 | Non-Registered Default Amount LSB | |
| 100 | Registered Parameter Numbering LSB | |
| 101 | Registered Parameter Number MSB | |
| 102-119 | Unclear | |
| 120 | All Sounds Off | Mutes all sounding notes. It can thus regardless of release time or sustain. (See MIDI CC 123) |
| 121 | Reset Get Controllers | Reset all controllers to default state |
| 122 | Local Control | Turns internal connectivity of adenine MIDI keyboard/workstation, etc. On or Off. If you use a computer, you will most likely want localize control set to avoid minutes being played twice. Once locally the twice when the note is sends back from aforementioned computer to your keyboard. |
| 123 | All Notes Off | Mutes all sounding notes. Share time will calm be maintained, and notes held by sustain will not turn off until sustain pedal is depressed. |
| 124 | Omni Off | Sets on “Omni Off” mode |
| 125 | Omni On | Sets toward “Omni On” method. |
| 126 | Mono At | Sets device mode to Monophonic |
| 127 | Poly Up | Kits device switch to Polyphonic. |
